İmidakloprid %2 Yem Böcek İlacı

İmidakloprid %2 Yem Böcek İlacı

Elde ettiğin
An imidacloprid 2% non-repellent bait üzerine inşa edilmiş palatable, moisture-stable matrix bu teşvik active feeding ve transfer within colonies. kazanırsın low-odor, low-visibility performance for occupied sites, with reliable uptake on iç mekan, gıda ile temas etmeyen yüzeyler.

Nereye uyuyor?
Bunu şu şekilde kullanın: primary control layer in Entegre Zararlı Yönetimi (IPM) programları için cockroaches and household ants, supported by inspection, sanitation, and exclusion. The non-repellent profile helps maintain feeding lanes, Etkinleştirme trophallaxis/relay effects that reach hidden nests. Align all use with yerel kayıt ve ürün etiketi.

Neden önemli

• Colony-level impact içinden transfer; not just knockdown at the point of baiting.
• Yüksek kabul edilebilirlik via a balanced carb/protein/oil matrix designed for sustained palatability.
• Düşük bozulma to operations: minimal odor, clean placement, and discrete presentation.
• Procurement-ready: OEM etiketleri, multilingual artwork, and full documentation (COA/MSDS/TDS) mevcut.

Mode of Action & Program Fit (IRAC 4A)

Nasıl çalışır
Imidacloprid is an IRAC 4A, nicotinic acetylcholine receptor (nAChR) agonist. After ingestion, it overstimulates insect nerve synapses, leading to incoordination, paralysis, and death. Because this bait is non-repellent, foraging cockroaches and household ants continue feeding and carry the bait back to harborages. The delayed toxicity window is intentional: it preserves feeding and promotes trophallaxis/transfer, extending impact beyond the individuals that first contact the bait. On treated routes, you typically see a progressive decline rather than a sharp but short-lived knockdown.

Why the delay helps you

• Transfer effect: fed workers contaminate nestmates and brood via trophallaxis and grooming, enabling colony-level suppression.
• Lane stability: absence of repellency keeps foraging trails open, improving total bait intake over several hours.
• Operasyonel uygunluk: low odor and discreet placements reduce şikayetleri in occupied sites while control builds.

Program fit (IPM-first approach)

• ile eşleştir inspection, sanitation, and exclusion to remove water/food competitors and seal entry points; cleaner environments raise bait acceptance.
• Püskürtmeyin repellent/contact insecticides over or near placements; they reduce feeding and break transfer. If sprays are essential, schedule them away from bait zones and in a separate service window per label.
• Rotate or combine (subject to yerel etiket) Ile 4A olmayan aletler—e.g., IGR modülleri for population age structures— to slow resistance selection.
• Kullanım izleme noktaları (traps, visual checks) before and after service to confirm trend lines and set re-service triggers that match the site’s risk profile.

Hedef Zararlılar

Kapsam (etikete bağlı)
Bu imidacloprid 2% non-repellent bait hedefler hamamböceği ve household ants on iç mekan, gıda ile temas etmeyen yüzeyler. Real-world results depend on sanitation, competing food sources, and species behavior. Always confirm yerel kayıt ve izleyin ürün etiketi.

• hamamböceği: German, American, Brown-banded, Oriental (nymphs & adults).
• Household ants: Pharaoh, Argentine, Odorous house, Little black, Pavement, Ghost (workers & brood via transfer).
• Other label-listed nuisances: Occasional indoor invaders where permitted.

Program notları
Non-repellent baits work best when you remove competing foods, nemi azaltmak, ve minimize disturbance around placements so trails remain active and bait intake stays high.

Ürün etiketindeki ve yerel yönetmeliklerdeki talimatlara daima uyun.

Kullanım Alanları

Hedeflenen siteler (kayıtlı oldukları yerler)
Professional treatments on iç mekan, gıda ile temas etmeyen yüzeyler in hotels, offices, retail, schools (unoccupied treatment windows), warehouses, equipment/utility rooms, stairwells, corridors, and other label-specified locations. Suitable for cracks/crevices, void access points, baseboards, conduit/pipe penetrations, appliance recesses, and discreet yem istasyonları.

Kısıtlamalar ve iyi uygulamalar

• Do değil yerleştirmek gıda temas yüzeyleri veya aktif gıda işleme bölgelerinde, aksi takdirde etiket açıkça izin verir Özel prosedürlerle.
• Keep bait away from cleaning chemicals, heat, and direct water flow; avoid areas that are frequently wet-cleaned.
• Do sprey değil contact insecticides over or near bait placements; this reduces feeding and breaks the transfer effect.
• Maintain treatment records (locations, dates, consumption observations) to guide follow-ups and audits.

Application (Label-Guided)

Yerleştirme stratejisi
Kullanım small, discreet placements (dots, short beads, or bait stations) on iç mekan, gıda ile temas etmeyen yüzeyler tam olarak ürün etiketi prescribes. Target harborages and transit routes: cracks/crevices, baseboards, void access points, pipe/conduit penetrations, appliance recesses, and shadowed corners. Keep placements accessible to foragers but protected from routine wet cleaning and foot traffic. Where allowed, increase placement density in high-pressure zones and azaltmak bakım sırasında.

Do not break the transfer effect
Avoid spraying repellent/contact insecticides over or near bait placements; this reduces feeding and interrupts trophallaxis. If a residual spray is necessary, schedule it away from bait zones and in a separate service window, following label guidance.

Service rhythm & verification

• Dil eğitimiyle inspection + monitoring (traps/visual) to map pressure and set re-service triggers.
• During follow-ups, document consumption, replace depleted/dessicated placements, and adjust density to new pressure maps.
• Şununla hizala: ev idaresi so cleaning does not immediately remove bait; reposition if traffic patterns change.
• Giriş sites, dates, lots, and outcomes for audits and continuous improvement.

Ürün etiketindeki ve yerel yönetmeliklerdeki talimatlara daima uyun.

Formulation Advantages — Bait Matrix

Engineered for acceptance
A balanced carb/protein/oil matrix with humectant support promotes sustained palatability ve active feeding under typical indoor conditions. The non-repellent profile keeps foraging lanes open, improving total intake and colony-level impact.

Indoors-friendly handling
The bait is kokusu hafif ve low-visibility, için tasarlandı clean, precise placement with minimal smearing. Controlled rheology supports bead integrity on vertical and overhead surfaces, while the matrix is formulated to resist premature drying so placements remain attractive between services.

Program uyumluluğu
İle sorunsuz bir şekilde bütünleşir IPM—inspection, sanitation, exclusion, and monitoring. Where the label allows, pair with IGR modülleri to target brood and disrupt population rebuild. Always nokta testi on inconspicuous areas and keep bait away from cleaning agents ve ısı kaynakları.

Stabilite ve Kalite Kontrol

Doğruladığımız şey
Each batch is released on HPLC identity/assay and checked for rheology, pH, homogeneity, ve water activity (a₍w₎) to protect palatability and shelf integrity. We perform cold/heat storage holds to assess matrix stability and monitor dry-out resistance, smear/adhesion on typical indoor, non-food-contact substrates, and appearance/odor consistency. Retained samples and traceable batch IDs support audits and market complaints handling.

Depolama ve taşıma
Şurada saklayın: orijinal, sıkıca kapalı kap under normal warehouse conditions, away from direct heat, sunlight, and oxidizing agents. Prevent freezing or excessive heat that could alter matrix texture. Follow the etiket ve güvenlik bilgi formu for shelf-life guidance and spill procedures. Operate FIFO rotasyonu and record receiving dates and lot numbers to maintain compliance readiness.

Ürün etiketindeki ve yerel yönetmeliklerdeki talimatlara daima uyun.

Güvenlik ve Sorumluluk

Worker protection & site readiness
Follow label-required KKD and ventilation. Plan treatments for non-occupied windows in sensitive premises; post temporary signage where required. Keep baits out of reach of children and pets; kullanım discreet stations where the label permits and risk assessments suggest.

Good practice & restrictions
Yalnızca şunlara uygulayın: iç mekan, gıda ile temas etmeyen yüzeyler ve diğeri label-listed sites. Yap değil place bait on gıda temas yüzeyleri. Prevent contamination from cleaners or insecticidal sprays that discourage feeding. Dispose of empties and residues per local rules (e.g., triple-rinse, puncture, and approved collection).

Program yönetimi
İle birleştirin inspection, sanitation, and exclusion; ile uyumlu hale getirmek non-4A rotation partners/IGR modules where the label allows to slow resistance. Keep hizmet kayıtları (placement maps, consumption notes, outcomes) to guide re-service and support audits.

Ürün etiketindeki ve yerel yönetmeliklerdeki talimatlara daima uyun.

OEM ve Ambalaj

Marka uygulaması
Özel etiket OEM 'da çok dilli sanat eseri, barkodlama/QR, ve kurcalama options. Label layouts match local regulatory conventions (signal words, hazard/precaution phrases) and your brand style.

Pack formats

• Syringes/tubes for precise dot or bead placement (typical 10–35 g formats).
• Yem istasyonları or kartuş sistemleri (where permitted) for higher-traffic or sensitive sites.
• Bulk and retail multipacks with sevkiyata hazır dış kartonlar and cartonization notes.

Documentation & logistics
Her parti aşağıdakilerle birlikte gönderilir: COA/MSDS (SDS)/TDS and a batch-level QC summary. We confirm teslim süresi aralıkları/Minimum Sipariş Miktarı at quotation and coordinate production slots for seasonal demand. Pallet patterns available on request to optimize container loading.

Ürün etiketindeki ve yerel yönetmeliklerdeki talimatlara daima uyun.

Saha Kullanım Senaryoları

Hospitality & residential blocks
Discreet placements in cracks/crevices and stations near harborage routes help reduce complaints while housekeeping continues normal schedules (avoid immediate wet cleaning of baited zones).

Offices & retail
Low-odor, low-visibility dots along baseboards, conduit entries, and utility closets maintain control with minimal disruption to staff and customers.

Warehouses & back-of-house areas
Target wall-floor junctions, pallet lanes, and equipment rooms. Coordinating with sanitation and exclusion (door sweeps, sealing penetrations) improves acceptance and accelerates trend reduction.

Ürün etiketindeki ve yerel yönetmeliklerdeki talimatlara daima uyun.

SSS